Turn Energy Data Into Lower Bills
StatStream Energy Intelligence watches every meter, finds peaks, penalties and waste, and tells your team exactly what to fix.
Or send your electricity bill on WhatsApp — get a free bill analysis →
Hourly Consumption Trend
Active Alerts
AI Insight
Shift B compressor runs 23 min longer than needed. Scheduling fix can cut consumption by 8%.
Why Industries Trust Us?
Clear answers on where your energy money goes — and what to do about it.
Cut Electricity Bills
Find idle-load waste, schedule loads around demand and tariff peaks, and keep power factor on target.
Avoid Penalty Charges
Live power factor and APFC monitoring flag problems early, and MD alerts warn you before contract demand is breached.
Prevent Unplanned Downtime
Bus bar hotspots, phase imbalance and harmonic anomalies are watched 24/7, with SMS, WhatsApp and email alerts the moment something drifts.
AI-Powered Energy Audits
Monthly AI audit reports analyse tariff slabs, load curves, and consumption patterns. Get specific, actionable recommendations — not just data.
Automated Compliance Reports
Daily, weekly, and monthly reports auto-generated and emailed. DISCOM-ready formats, energy consumption summaries, and trend analysis without manual effort.
Cloud or On-Premise
Run it in the cloud with no servers to manage — updates and backups handled for you — or on-premise if your data must stay on site. Dashboards on any device.
A Glimpse Into Our Capabilities
Unlock real-time visibility and intelligent automation to cut costs and eliminate waste across your facility.
Real-Time Energy Analytics Dashboard
Gain instant visibility into consumption patterns with live data streams from every meter. Spot anomalies, track demand peaks, and make data-driven decisions — all from one screen.
- Live load curves with active and reactive power overlay
- AI-powered demand forecasting to avoid penalty charges
- Visual heatmaps showing consumption across shifts and zones
- Automatic anomaly detection with root cause analysis
AI Analysis & Recommendations
Go beyond dashboards. StatStream's AI engine continuously analyzes your energy data to surface actionable insights — from tariff optimization and load scheduling to equipment health predictions and carbon footprint reduction.
- AI-powered bill analysis with tariff plan comparison and savings estimate
- Anomaly detection that learns your facility's normal patterns
- Load scheduling recommendations to shift consumption to off-peak hours
- Predictive maintenance alerts based on equipment behavior trends
- Monthly AI audit report with prioritized action items and ROI projections
Switch chiller ops to ToD Category III (22:00–06:00). Projected savings: 18% reduction
Stagger compressor startups across 3 panels to reduce max demand by 12% and avoid demand penalty charges.
Motor on Feeder 9 showing 18% higher current draw trend — bearing wear likely. Schedule inspection within 2 weeks.
R-Phase current exceeded 120A on Panel 3. Auto-notified: SMS + WhatsApp
Power factor dropped to 0.82 on Feeder 7. APFC bank may need inspection.
Weekly energy report sent to 4 stakeholders. Energy reduced by 14.2% vs last week.
Switch to ToD tariff Category III during 22:00–06:00 for chiller operations. Estimated monthly savings: 18% on energy costs
Automate Alerts, Reports & Compliance
Eliminate manual monitoring. StatStream watches every parameter 24/7 and triggers instant alerts, generates compliance reports, and surfaces AI-driven savings recommendations — automatically.
- Multi-channel alerts via SMS, Email, WhatsApp, and Telegram
- Scheduled daily/weekly/monthly reports delivered to stakeholders
- AI bill analysis with tariff optimization suggestions
- Automated compliance documentation for energy audits
Time-Of-Use Tariff Optimization
Turn tariff complexity into clear savings. Configure your ToU/ToD schedule once and StatStream highlights peak-cost windows, simulates bills, and recommends load shifting to reduce energy spend.
- Define peak / shoulder / off-peak rates and seasons in minutes
- Automatic cost breakdown by time band, shift, and feeder
- Bill simulation and savings comparison across tariff categories
- Recommendations to shift flexible loads to off-peak windows
- Alerts when demand spikes inside peak-cost hours
Interactive SLD & BMS Monitoring
Map your complete energy network in a live digital view. Monitor power flow, equipment state, and key performance signals in real time to make faster, data-backed decisions.
- No-code diagram builder for rapid deployment
- Live energy KPIs and operational metrics on every node
- Real-time asset health and status visibility across the network
- Unified view for faster fault isolation and response
Bus Bar Temperature Monitoring
Detect hotspots before they become failures. Wireless temperature sensors continuously monitor every bus bar junction, giving you early warning of loose connections, overloading, and insulation degradation.
- 24/7 wireless temperature monitoring at every junction point
- Instant alerts when temperatures cross warning or critical thresholds
- Historical trend analysis to predict maintenance needs
- Prevent catastrophic failures, fires, and unplanned downtime
APFC Panel Monitoring
Maintain optimal power factor automatically. Monitor capacitor bank health, switching cycles, and reactive power compensation in real time to avoid costly utility penalties and extend equipment life.
- Real-time power factor tracking with target vs actual comparison
- Capacitor bank health monitoring — switching cycles, THD, temperature
- Automatic alerts on capacitor failure or PF dropping below threshold
- Penalty avoidance calculator showing savings from PF correction
LT / MV / HT Panel Monitoring
Complete electrical distribution visibility — from 11kV HT incomers to LT distribution boards. Monitor voltage, current, power, harmonics, and phase balance across your entire switchgear hierarchy.
- Unified view of HT, MV, and LT panels in a single dashboard
- Detect humidity levels inside panels to prevent short circuits, corrosion, and equipment downtime
- Per-phase voltage, current, and power monitoring with unbalance detection
- Breaker status tracking with trip event logging and analysis
- Harmonic distortion (THD) monitoring to protect sensitive equipment
How Energy Intelligence Works
From meters to insights in under 24 hours — no coding needed.
Install & Connect
Connect your existing Modbus energy meters, CTs, and PTs to the StatStream IoT Gateway. Supports single & three-phase meters.
Stream to Cloud
Gateway auto-discovers meters, maps parameters (kW, kVAh, PF, THD), and streams data securely to StatStream Cloud.
Analyze & Alert
AI engine processes real-time and historical data — detects anomalies, generates load profiles, and triggers multi-channel alerts instantly.
Optimize & Save
Access dashboards, automated reports, AI-powered energy audits and recommendations your team can act on.
Install & Connect
Connect your existing Modbus energy meters, CTs, and PTs to the StatStream IoT Gateway. Supports single & three-phase meters.
Stream to Cloud
Gateway auto-discovers meters, maps parameters (kW, kVAh, PF, THD), and streams data securely to StatStream Cloud every 5 seconds.
Analyze & Alert
AI engine processes real-time and historical data — detects anomalies, generates load profiles, and triggers multi-channel alerts instantly.
Optimize & Save
Access dashboards, automated reports, AI-powered energy audits and recommendations your team can act on.
Send us one electricity bill.
We'll show you where you're overpaying.
Send a photo or PDF of your latest bill on WhatsApp. We'll share a tariff comparison and savings estimate.
- Tariff plan comparison
- Savings estimate
- Free, no commitment
WhatsApp +91 74989 20353 · photo or PDF
Or book a free demo Call +91 74989 20353